A microphone on a desk can pick up more than speech. A keyboard tap, a hand on the tabletop, or a bump through the boom arm can travel mechanically into the mic. A shock mount suspends the microphone in elastic supports so some of that movement reaches the body less directly. It is not a cure for room noise, and its value depends on a secure fit to your exact microphone and stand.
The six active-New mounts here split into two buying paths: diameter-fit cradles for cylindrical microphones and model-specific mounts for particular AKG or Blue microphones. Measure the mic body where the mount grips it, inspect its mounting point, and check your boom-arm thread before choosing. A product title that says “universal” is no substitute for those dimensions. If the mic slips or the assembly sags, the isolation claim does not help.
Start with the vibration path. Record a short spoken passage, then tap the desk at your normal typing force. If the sound travels through the stand, a correctly fitted shock mount may help. If it comes from keyboard noise in the air, change mic position and technique first.Microphone Shock Mounts Compared
| Image | Product | Details | Check Price |
|---|---|---|---|
 | Boseen 47–53 mm | Mic fit: 47–53 mm Mount: Elastic metal cradle Included: Screw adapter Best fit: Diameter-first setup | Check Price on Amazon |
 | YOUSHARES AT2020 | Mic fit: 47–51 mm listed Mount: Elastic rope Included: Screw adapter Best fit: AT2020 family | Check Price on Amazon |
 | ZRAMO TH106 | Mic fit: 48–51 mm Mount: Metal with insert Included: 2 adapter screws Best fit: Narrow cylinder fit | Check Price on Amazon |
 | BTOOP Shock Mount Kit | Mic fit: 46–51 mm stated Mount: Elastic metal cradle Included: Pop filter + adapter Best fit: Mount + filter | Check Price on Amazon |
 | Geekria AKG | Mic fit: P120 / P420 / P820 Mount: Elastic metal spider Included: Adapter + 5 screws Best fit: Listed AKG models | Check Price on Amazon |
 | Auphonix Pro | Mic fit: Blue Yeti / Snowball Mount: Suspension bands Included: 3/8 & 5/8 threads Best fit: Listed Blue models | Check Price on Amazon |
1. Boseen 47–53 mm — Best Broad Diameter Range
Boseen describes a 47–53 mm microphone-body range and an elastic suspension within a metal frame. Its listing names a variety of condenser microphones, but a model list can hide generation and body-size differences. Measure your own mic at the point the holder grips it. The package is described as one shock mount, a screw adapter and an elastic band. It does not include a boom arm or microphone.
An angle adjustment with a locking knob can help place the capsule comfortably above a desk. The adjustability helps if the boom arm approaches from the side, but the joint must remain tight once the mic and cable are attached. Boseen’s claim that the suspension blocks most vibration is seller language, not a measured result for your desk. Test by recording the same tap before and after installation at unchanged gain.
Our Take Pick this if your mic measures within 47–53 mm. The adjustable angle adds flexibility, but check the adapter and stand load before relying on it.
- 47–53 mm range is stated.
- Elastic suspension in a metal frame.
- Angle adjustment and screw adapter listed.
- Named microphone compatibility still needs measurement.
- No stand or boom arm included.
2. YOUSHARES AT2020 — Best AT2020-Family Fit
YOUSHARES markets this suspension for AT2020, AT2020USB, AT2020USB+ and AT2035 microphones. The listing also gives a diameter in millimeters, 47–51 mm, alongside an inconsistent inch-range typo. Use the millimeter range as a lead, then compare your actual microphone body and the seller’s current fit information. Do not infer that every Audio-Technica microphone or every version of the named models shares the same shell.
The elastic-rope holder and screw adapter are the useful parts of the stated package. The seller explicitly says the boom arm is not included. A bullet mentions a pop filter, but the package list says one shock mount, so do not budget around receiving a filter without checking the current offer. If a clamp or foam sleeve covers the mic body, measure the exposed surface that the mount will actually grip.
Our Take Start here if you own a named AT2020-family mic and can confirm its body diameter. Treat the pop-filter mention as ambiguous until the exact package is verified.
- Specific Audio-Technica models named.
- 47–51 mm metric range listed.
- Screw adapter described.
- Inch-size bullet contains a typo.
- Pop-filter inclusion is unclear.
- Boom arm excluded.
3. ZRAMO TH106 — Best Narrow 48–51 mm Fit
The ZRAMO TH106 listing specifies a 48–51 mm fit and a metal construction. It also describes a felt or foam insert intended to hold and protect the microphone. This advertised span is narrower than the Boseen mount’s, which can be useful when a microphone is near 50 mm and a broad cradle feels too loose. It does not, however, prove that a particular mic will fit without checking its shape and any protruding controls.
Two adapter screws, described as one gold and one black, are included according to the features. Confirm the thread combination with the offer and your arm, because color alone does not establish thread size. A secure mount should let the microphone sit upright without twisting and should leave the cable free of hard contact with the desk or arm. Cable strain can carry movement around an otherwise useful suspension.
Our Take Choose TH106 for a measured 48–51 mm cylindrical body when you want a metal cradle and protective insert. Do not call it universal outside that stated range.
- Clear 48–51 mm advertised span.
- Metal body with protective insert.
- Two adapter screws listed.
- Narrow size range.
- Adapter thread sizes need confirmation.
4. BTOOP Shock Mount Kit — Best Pop-Filter Pairing
BTOOP combines a suspension shock mount and pop filter in its stated package. Its copy gives several overlapping dimensions: the mount body is described as 45–53 mm, while the intended microphone diameter is 46–51 mm. For a purchase decision, treat the narrower mic-fit figure as the constraint and check the live listing photos and specifications. The seller explicitly says the kit does not fit Blue Yeti.
The filter is described as a layered piece that sits between the mouth and microphone to reduce plosive air bursts. A pop filter’s job is different from stopping mechanical desk vibration. The kit includes a 3/8-to-5/8-inch adapter for a compatible boom arm or stand; the arm or stand is not listed as included. Position the filter without touching the microphone or elastic suspension, or a bump to the filter can still reach the capsule.
Our Take Pick this if a 46–51 mm mic needs both elastic suspension and a pop filter. Skip it for Blue Yeti and measure carefully because the seller gives multiple size descriptions.
- Shock mount and pop filter listed together.
- 3/8-to-5/8-inch adapter described.
- Mic-fit range stated in millimeters.
- Multiple size figures need careful reading.
- Seller excludes Blue Yeti.
- No arm or stand described.
5. Geekria AKG — Best Listed AKG Fit
Geekria names AKG P120, P420 and P820 compatibility for this metal spider-style mount. Naming those models makes it a more targeted option than a cradle bought only from a nominal diameter. The features describe elastic bands that suspend the mic, a rubber mat where the metal bolt meets the microphone, and five different bottom screws. The package also lists a 3/8-to-5/8-inch adapter.
Model-specific wording is still a claim from the seller, not a fit test of your individual microphone. Check where the mount fastens and whether a bottom connector or body control will interfere. The rubber mat may protect the finish where parts meet, but it does not mean every vibration path is eliminated. If the boom arm clamp is loose at the desk edge, fix that contact before deciding the suspension itself is inadequate.
Our Take Pick this if you own a listed AKG P-series microphone. Verify your exact model and the supplied screw that makes the assembly secure.
- AKG P120, P420 and P820 named.
- Metal spider mount and elastic bands.
- Adapter and five bottom screws listed.
- Not a general fit promise for other AKG models.
- Exact fastening point needs checking.
6. Auphonix Pro — Best Blue Yeti Fit
Auphonix specifically lists Blue Yeti, Blue Yeti Pro USB and Blue Snowball compatibility. A model-specific path helps here because these microphones do not all resemble a plain 50 mm condenser cylinder. The product bullets describe multi-sized 3/8-inch and 5/8-inch threads and say no separate adapter is needed. Confirm your arm’s thread and mic mounting point rather than assuming a visual match from a photo.
The seller gives a compact 5.5-by-3.5-inch size and 7-ounce weight. The size and weight are clues for a crowded desk, not evidence that it will isolate every keyboard knock. Check that the suspended microphone clears a monitor, pop filter and headphone cable. Leave the cable with a little slack, because a taut cable touching the desktop can transmit movement even when the microphone body is hanging freely.
Our Take Pick this if you own a listed Blue microphone. Confirm the precise mic and arm connection, then test desk taps at unchanged gain.
- Blue Yeti, Yeti Pro USB and Snowball listed.
- 3/8-inch and 5/8-inch threads described.
- Compact listed dimensions.
- Other Blue variants need separate fit checks.
- Small size does not prove isolation performance.
Buying Guide: Trace the Vibration Path
Measure the microphone before shopping
For a diameter-fit suspension, the critical number is body width where the mount grips. Do not measure a grille that is wider than the body or a decorative collar that the elastic cradle will not touch. The Boseen 47–53 mm, ZRAMO TH106 and BTOOP kit have different stated spans. A few millimeters can separate a snug cradle from a mic that slips.
Model-specific mounts can be easier when their compatibility list matches your exact mic. The Geekria AKG and Auphonix Pro use that route, but seller lists can outlive a microphone revision. Check the attachment point, not just the product name. If you cannot identify the mic model and dimensions, pause the purchase rather than guessing from a stock image.
Check threads, weight and cable routing
A common adapter connects 3/8-inch and 5/8-inch threads, but a threaded match alone does not make a safe setup. The mount, mic and cable add weight and pull to a boom arm. Tighten the arm at the desk, put the mic at speaking height, and see whether it drifts when released. A suspension with a secure joint should not depend on a cable pulling it into place.
Leave cable slack below the microphone instead of stretching a USB or XLR lead across the desk. A taut lead can bypass the elastic support and carry a tap straight into the body. For more on choosing the supporting arm, see our desktop boom-arm guide. A shock mount solves a different piece of the mechanical path.
Test against the right kind of noise
Mechanical isolation targets movement transmitted through a desk, clamp or stand. It will not remove speech from another room, laptop-fan noise in the air or reflections from a bare wall. Record a fixed sentence and a few controlled desk taps before and after mounting, keeping mic position and gain steady. Listen to the low thumps and rattles separately from the spoken voice.
If the recording still contains airborne keyboard clacks, move the microphone closer to the speaker and farther from the keys, or adjust the desk arrangement. A reflection shield addresses some nearby reflected sound, not the same problem as a shock mount. Neither accessory can make a noisy room silent. Choose the fix that matches the recorded defect.
Frequently Asked Questions
Will a shock mount silence my keyboard?
No. A mount may reduce structure-borne vibration when a keypress shakes the desk, clamp or arm. The sound of the key itself also travels through air to the microphone. An elastic suspension cannot block that airborne path, and the exact mechanical benefit depends on the mic and desk setup.
Make two recordings with unchanged gain and placement: one with normal typing, one with isolated desk taps while staying silent. If taps are the larger defect, fit and secure the suspension. If key clicks dominate, change mic placement, typing distance or recording timing before buying more hardware.
Can I use a universal mount with any microphone?
No. Advertised diameter ranges and fastening methods are firm constraints. A microphone can be too wide, too narrow, too heavy or shaped so a cradle covers a port or switch. “Universal” in a title is seller language, not a promise of fit to every microphone ever sold.
Check the body diameter at the actual gripping point and inspect the arm’s thread. If the mic is a Blue Yeti or a named AKG model, a seller’s model-specific option may be easier to evaluate, but still check the exact version. Do not force a body into a tight mount or trust an unstable loose grip.
Do I need a pop filter as well?
Only if plosive air bursts are a problem. A pop filter sits between mouth and capsule and can soften bursts from sounds such as “p” and “b.” A shock mount suspends the mic to address mechanical movement. The BTOOP listing combines both pieces, while the other five listings are primarily suspension choices.
Listen to a saved take before adding either accessory. A low desk thump and a sharp vocal pop have different causes. Position a filter without letting it touch the microphone or pull the suspension sideways, and leave enough room to speak naturally at a consistent distance.
Source boundary: Exact product identity, fit ranges, included parts, dimensions and listed compatibility come from the six Amazon US listings checked for active New offers on 2026-10-01. We did not test vibration reduction, microphone fit, stand stability or sound quality. The featured image is illustrative, not a listed model. Verify current dimensions and package contents before buying.
